BLACKMAGIC GPI AND TALLY INTERFACE

Blackmagic Design GPI and Tally Interface

• Display tallies for video signals
• Indicates on air status
• 8 contact closure input and output
• Connect with multiple interfaces

Add tally to your ATEM switcher with Blackmagic Design's GPI and Tally Interface.
With 8 contact closure tally outputs, you can send a tally signal to your cameras, replay machines and monitors so everyone knows which camera is 'on-air'.
If you need more tally outputs, simply connect multiple GPI and Tally Interfaces together because it connects via Ethernet to your ATEM production switcher.

Contact Closure:

25 pin D-type connector providing 8 opto isolated inputs and 8 relay contact closure outputs

Computer Interface:

1 x USB 2.0 high speed interface for configuration and firmware updates

Inputs:

Optical isolators triggered by connection to ground. Max 5V at 14mA

Outputs:

Mechanical relay contact closure to ground. Max 30V at 1A

Ethernet:

10/100 BaseT with loop through for connecting to other ethernet enabled equipment